Wet Rot Treatment FAQs
Straight answers to the questions we're asked most.
What is wet rot?
Wet rot is timber decay caused by fungi, most commonly Coniophora puteana, that grow on wood which stays very wet for long periods. Affected timber goes soft, dark and spongy, and may crack along the grain. Unlike dry rot, wet rot stays confined to the wet area and stops once the timber dries.
How do I identify wet rot?
Signs of wet rot include timber that feels soft or spongy, darkened wood, cracking along the grain, flaking paint and a musty smell. Pressing a screwdriver into the wood will sink in easily. It usually appears where timber is wet, such as sills, door frames, fascias and joists near leaks.
How much does wet rot treatment cost?
Wet rot repairs typically cost £120–£350 per window for resin repairs, £250–£550 for a new sill and £180–£400 for door frame repairs. Floor joist repairs start from about £200 per joist, and fascia replacement costs £45–£90 per metre. Costs depend on the extent of decay and access.
Can wet rot spread to other timber?
Wet rot does not spread through masonry like dry rot. It only affects timber that stays wet. However, if the moisture source continues, nearby timber can also become wet and decay. Fixing leaks, drainage and ventilation stops wet rot from affecting more wood.
Can wet rot be repaired without replacing timber?
Yes, small areas of wet rot can often be repaired without full replacement. The decayed wood is cut out, the remaining timber hardened and the gap filled with epoxy resin. Larger areas may need new timber spliced in. This keeps original joinery, which is especially valuable on period windows.
What causes wet rot?
Wet rot is caused by timber staying wet over a long period, usually above about 50% moisture content. Common causes include leaking gutters, roofs and plumbing, failed paintwork on windows, poor drainage at doors, timber in contact with damp masonry and condensation in poorly ventilated spaces.
Is wet rot worse than dry rot?
Wet rot is usually less serious than dry rot. It stays confined to wet timber and stops once the wood dries, so repairs are more localised. Dry rot can spread through masonry and often needs more extensive treatment. However, wet rot in structural timbers can still cause significant damage.
How long does wet rot repair take?
Window and door repairs usually take half a day to a day each. Floor joist and floorboard repairs can take one to several days, and fascia or roof timber repairs one to three days, depending on access. Painting and finishing add a little time.
Should I repair or replace rotten windows?
If most of the window is sound, repair is usually cheaper and keeps original joinery. Resin and splice repairs can extend the life of timber windows for many years. Replacement may be better if rot is widespread, frames are distorted or you want better energy performance.
Does wet rot need chemical treatment?
Wet rot mainly needs the moisture source fixed and decayed timber removed. Preservative treatment of nearby sound timber adds protection while the area dries, but it is not a substitute for keeping wood dry. Good paint maintenance and ventilation are the best long-term prevention.
Can wet rot affect floor joists?
Yes, wet rot commonly affects floor joists, especially joist ends in damp walls and joists under bathrooms with leaks. Decayed joists can weaken floors. Specialists lift boards to inspect, then repair by sistering new timber alongside or replacing joist ends, and fix the cause.
Is wet rot covered by insurance?
Wet rot is usually not covered by home insurance because it develops gradually from damp or poor maintenance. If it results from a sudden insured event, such as an escape of water, part of the damage may be covered. Check your policy and contact your insurer promptly.
Get a free wet rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote