Wet Rot Treatment
Window Frame and Sill Repairs
Rotten sills, bottom rails and frame joints on timber windows cut out and repaired with resin or new timber, keeping original windows in use.

What's involved
Timber windows rot first where water sits: the sill, the bottom rail of each sash or casement and the lower joints of the frame. The joiner probes each area with a bradawl to find soft wood, then decides on a repair. Small areas of decay are cut back to sound timber, treated with a wood hardener and filled with a two-part epoxy resin that is shaped and sanded flush. Larger areas are cut out and new pre-treated timber is spliced in with waterproof glue and stainless fixings. A completely rotten sill can be replaced while the frame stays in place. Repairs are primed and painted promptly. Most windows take half a day to a day each. Plan for dry weather.
How we handle it
Describe the decay
Use the quote form to say which timbers are soft or rotten, where they are and how long the problem has been noticed, with photos if possible.
Inspection
A joiner or timber specialist probes timbers, takes moisture readings, confirms wet rot rather than dry rot and finds the moisture source.
Clear fixed price
You receive one price covering the repair or replacement, treatment and the fix for the moisture source where it is part of the job.
Repair work
Decayed timber is cut out, sound timber treated and new wood or resin fitted. Leaks, drainage or ventilation are put right.
Finish and protect
Repairs are primed, painted or sealed. You receive details of the work and advice on maintenance to prevent future rot.
Price guide
Wet rot treatment is priced on the timber involved, how much is decayed and whether repair or replacement is best. Resin repairs to windows cost less than new sills, and replacing a few floorboards costs less than joist work. Access, such as scaffolding for fascias, adds to costs. The 2026 guide figures below cover common repairs.
- Roof timber repair: £400–£2,000. Rafter ends, wall plates or decking repaired alongside roofing work, depending on scale.
- Fascia and soffit replacement: £45–£90 per metre. Timber or uPVC boards replaced, with gutters refitted; scaffolding priced separately if needed.
- Floor joist repair: from £200 per joist. Sistering or replacing decayed joist ends, plus lifting and refitting floorboards.
Questions about window frame and sill repairs
Should I repair or replace rotten windows?
If most of the window is sound, repair is usually cheaper and keeps original joinery. Resin and splice repairs can extend the life of timber windows for many years. Replacement may be better if rot is widespread, frames are distorted or you want better energy performance.
Other services
Door Frame and Threshold Repairs
Rotten door frame feet, thresholds and the bottom of external doors repaired or replaced so doors close properly and stay weathertight.
Floor Joist and Floorboard Repairs
Joist ends, wall plates and floorboards softened by wet rot cut out and replaced, with the cause such as leaks or blocked air bricks fixed.
Fascia, Soffit and Bargeboard Repairs
Rotten fascias, soffits and bargeboards replaced in timber or uPVC, with rafter ends and gutter brackets checked while access is in place.
Roof Timber Repairs
Rafters, purlins, wall plates and roof decking softened by long-term roof leaks repaired, with the leak fixed and ventilation improved.
Preservative Treatment and Prevention
Targeted preservative treatment of remaining timber and practical steps to keep wood dry, from paint maintenance to ventilation and drainage.
Window Frame and Sill Repairs near you
Get a free wet rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote