Wet Rot Treatment

Nationwide · England, Scotland & Wales

Wet Rot Treatment across the UK

Rotten timber cut out, replaced and the water source fixed.

In short

Wet Rot Treatment is the repair of timber decayed by wet rot fungi, such as Coniophora puteana, which attack wood that stays very wet for long periods. It involves fixing the source of moisture, cutting out soft and decayed wood, treating sound timber nearby with preservative and fitting new pre-treated timber or resin repairs. Unlike dry rot, wet rot stays confined to the wet area.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Wet Rot Treatment quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

Wet rot is the most common type of timber decay in UK homes. It turns window sills, door frames, fascias, skirting boards, floor joists and roof timbers soft, dark and spongy wherever wood is kept wet by leaks, condensation, poor drainage or contact with damp masonry. Several fungi are involved, the most common being cellar fungus. The good news is that wet rot cannot spread through masonry like dry rot, and it stops once the timber dries out.

We arrange wet rot repairs through vetted, insured joiners and timber specialists. They check how far the decay reaches with a probe and moisture meter, find out why the timber got wet, then decide whether a resin repair, a splice or a full replacement is the right fix. The water source is fixed at the same time, so the problem does not come back. Send details and photos through the quote form and we will arrange a clear price for the work.

How it works

  1. Describe the decay

    Use the quote form to say which timbers are soft or rotten, where they are and how long the problem has been noticed, with photos if possible.

  2. Inspection

    A joiner or timber specialist probes timbers, takes moisture readings, confirms wet rot rather than dry rot and finds the moisture source.

  3. Clear fixed price

    You receive one price covering the repair or replacement, treatment and the fix for the moisture source where it is part of the job.

  4. Repair work

    Decayed timber is cut out, sound timber treated and new wood or resin fitted. Leaks, drainage or ventilation are put right.

  5. Finish and protect

    Repairs are primed, painted or sealed. You receive details of the work and advice on maintenance to prevent future rot.

Wet Rot Treatment prices

Wet rot treatment is priced on the timber involved, how much is decayed and whether repair or replacement is best. Resin repairs to windows cost less than new sills, and replacing a few floorboards costs less than joist work. Access, such as scaffolding for fascias, adds to costs. The 2026 guide figures below cover common repairs.

JobGuide priceNotes
Window sill or frame resin repair£120–£350 per windowCutting out decay, hardening, filling with epoxy resin and painting, depending on the extent.
Window sill replacement£250–£550New pre-treated or hardwood sill fitted with the frame left in place, plus painting.
Door frame splice repair£180–£400Rotten frame feet cut out and new timber spliced in, with threshold repairs if needed.
Floor joist repairfrom £200 per joistSistering or replacing decayed joist ends, plus lifting and refitting floorboards.
Fascia and soffit replacement£45–£90 per metreTimber or uPVC boards replaced, with gutters refitted; scaffolding priced separately if needed.
Roof timber repair£400–£2,000Rafter ends, wall plates or decking repaired alongside roofing work, depending on scale.

What affects the price →

Who we work for

Homeowners

Owners with soft window sills, rotten door frames or spongy floors want lasting repairs that fix the cause, and prefer to repair original timber where possible.

Owners of period homes

Victorian and Edwardian homes with original sash windows and timber detailing benefit from resin and splice repairs that keep historic joinery in place.

Landlords

Landlords need rotten windows, doors and floors repaired quickly to keep properties safe, secure and weathertight for tenants.

Homebuyers

Buyers whose survey notes wet rot in windows, floors or roofs need a clear repair price to negotiate with the seller before completing.

Managing agents and freeholders

Agents responsible for blocks of flats need wet rot in shared roofs, fascias and communal windows repaired as part of planned maintenance.

Rules and standards that apply

  • Replacement windows in England and Wales must meet Building Regulations, usually certified through a competent person scheme or building control, although like-for-like repairs to existing windows do not need approval.
  • The Control of Substances Hazardous to Health Regulations 2002 apply when timber preservatives are used, requiring a risk assessment and following product safety data sheets.
  • Listed buildings and many conservation areas have controls on replacing original windows and joinery, so repair is often preferred and consent may be needed for replacement.

How to choose the right wet rot treatment company

  • Choose a joiner or specialist who finds and fixes the moisture source, not just the rotten timber.
  • Ask whether they offer resin and splice repairs for windows and doors before recommending full replacement.
  • Check they can tell wet rot from dry rot, as the treatment and scope are very different.
  • Make sure the price includes priming and painting, as bare repairs will soon rot again.
  • Ask about experience with period joinery if you have sash windows or original doors.
  • Check they carry public liability insurance and will arrange scaffolding safely where needed.

Frequently asked questions

What is wet rot?

Wet rot is timber decay caused by fungi, most commonly Coniophora puteana, that grow on wood which stays very wet for long periods. Affected timber goes soft, dark and spongy, and may crack along the grain. Unlike dry rot, wet rot stays confined to the wet area and stops once the timber dries.

How do I identify wet rot?

Signs of wet rot include timber that feels soft or spongy, darkened wood, cracking along the grain, flaking paint and a musty smell. Pressing a screwdriver into the wood will sink in easily. It usually appears where timber is wet, such as sills, door frames, fascias and joists near leaks.

How much does wet rot treatment cost?

Wet rot repairs typically cost £120–£350 per window for resin repairs, £250–£550 for a new sill and £180–£400 for door frame repairs. Floor joist repairs start from about £200 per joist, and fascia replacement costs £45–£90 per metre. Costs depend on the extent of decay and access.

Can wet rot spread to other timber?

Wet rot does not spread through masonry like dry rot. It only affects timber that stays wet. However, if the moisture source continues, nearby timber can also become wet and decay. Fixing leaks, drainage and ventilation stops wet rot from affecting more wood.

Can wet rot be repaired without replacing timber?

Yes, small areas of wet rot can often be repaired without full replacement. The decayed wood is cut out, the remaining timber hardened and the gap filled with epoxy resin. Larger areas may need new timber spliced in. This keeps original joinery, which is especially valuable on period windows.

What causes wet rot?

Wet rot is caused by timber staying wet over a long period, usually above about 50% moisture content. Common causes include leaking gutters, roofs and plumbing, failed paintwork on windows, poor drainage at doors, timber in contact with damp masonry and condensation in poorly ventilated spaces.

Is wet rot worse than dry rot?

Wet rot is usually less serious than dry rot. It stays confined to wet timber and stops once the wood dries, so repairs are more localised. Dry rot can spread through masonry and often needs more extensive treatment. However, wet rot in structural timbers can still cause significant damage.

How long does wet rot repair take?

Window and door repairs usually take half a day to a day each. Floor joist and floorboard repairs can take one to several days, and fascia or roof timber repairs one to three days, depending on access. Painting and finishing add a little time.

See all FAQs →

Get a free wet rot treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote