Guide · Homeowners · 3 min read · Updated 17 November 2026
How Much Does Wet Rot Treatment Cost in the UK?
Short answer
Wet rot repairs in the UK cost £120–£350 per window for a resin repair, £250–£550 for a new window sill and £180–£400 for a door frame splice. Floor joist repairs start from £200 per joist, fascia and soffit replacement costs £45–£90 per metre and roof timber repairs run £400–£2,000. The moisture source must also be fixed.
Wet rot repair prices
Wet rot is usually a local problem. The fungus only attacks timber that stays very wet, so the decay is confined to the area where water has been getting in, such as the bottom of a window, the foot of a door frame or a joist end sitting in a damp wall. That keeps most repairs relatively affordable compared with dry rot, as long as the problem is caught before structural timbers are badly affected.
The prices below are typical 2026 guide figures across the UK. They cover the repair itself. Fixing the cause, such as a leaking gutter or blocked air bricks, and any scaffolding are usually priced separately.
| Repair | Typical price | Notes |
|---|---|---|
| Window sill or frame resin repair | £120–£350 per window | Cut out decay, harden, fill with epoxy resin, paint |
| Window sill replacement | £250–£550 | New pre-treated or hardwood sill, frame left in place |
| Door frame splice repair | £180–£400 | Rotten frame feet cut out and new timber spliced in |
| Floor joist repair | from £200 per joist | Sistering or replacing decayed joist ends |
| Fascia and soffit replacement | £45–£90 per metre | Timber or uPVC, gutters refitted, scaffolding extra |
| Roof timber repair | £400–£2,000 | Rafter ends, wall plates or decking with roofing work |
What affects the cost
The type of timber involved makes the biggest difference. Joinery repairs to windows and doors are quick and cheap compared with structural work on joists, wall plates and rafters, which may need floors lifted, temporary support and more extensive replacement. How far the decay has spread also matters. A small soft patch on a sill can be resin-repaired in an hour or two, while a sill that is rotten right through needs replacing.
Access is another factor. Fascias, bargeboards and roof timbers often need a tower or scaffolding, which can cost as much as the carpentry. Finally, the finish matters. Matching period joinery in a conservation area, or using durable hardwood, costs more than a standard softwood repair.
Finish choice affects cost as well as appearance. Replacing timber fascias with uPVC removes the need for future painting, while timber suits period homes and conservation areas.
- Type of timber: joinery, floor structure or roof structure
- How far the decay extends into the timber
- Resin repair versus full replacement
- Scaffolding or towers for high-level work
- Repairing the moisture source at the same time
- Matching period joinery or using hardwood
Worked examples
A typical sash window with a soft bottom rail and a sill that is rotten at one corner can usually be resin-repaired. The decayed wood is cut out, the surrounding timber hardened, the void filled with epoxy and the area shaped, primed and painted. That falls in the £120 to £350 per window range.
A suspended timber floor where three joist ends have rotted in a damp external wall might cost around £600 or more for the joist repairs at from £200 per joist, plus lifting and refitting floorboards and fixing the cause, such as blocked air bricks or high outside ground. A run of rotten timber fascia along the front of a house might be replaced at £45 to £90 per metre, with scaffolding on top.
Fix the cause or pay twice
Wet rot only grows while timber stays wet. Once the moisture source is removed and the wood dries, the fungus stops. That is good news, because it means wet rot does not usually need heavy chemical treatment. But it also means that any repair which ignores the cause will fail. A new sill fitted under a window with failed paint and no drip groove will rot again. A new joist end resting in a wall that is still damp will decay in the same way as the old one.
Make sure every quote names the moisture source and says how it will be dealt with, whether that is repainting, clearing gutters, fixing a leak or improving ventilation.
Comparing quotes
Ask each contractor to price the same scope and to state whether they propose resin repair or replacement for each item, which timber they will use and how it will be treated and finished. For floor and roof timbers, ask how decayed ends will be isolated from damp masonry, for example with a damp proof membrane or joist hangers. For high-level work, check whether scaffolding is included.
It is worth asking for photos of the decayed timber once opened up, and of the finished repair before painting. That gives you a record of what was done and confirms the decay was fully removed.
When the cost could be higher
If wet rot has been left for many years, especially in roof timbers or floor joists, the damage may extend further than first thought once the area is opened up. A roof that has leaked for several winters may need rafters, wall plates and decking replaced, pushing costs towards the top of the £400 to £2,000 range or beyond. If the decay is structural, a structural engineer may need to specify repairs. A specialist survey before work starts helps reduce surprises.
Asking the contractor to price a contingency for extra decay, at a stated rate, helps you budget and avoids disputes if more rotten timber is found once work begins.
Questions people also ask
Is wet rot expensive to fix?
Usually not, if it is caught early. Most wet rot affects joinery such as sills, frames and fascias, and repairs often cost a few hundred pounds. Costs rise when structural timbers such as joists, wall plates or rafters are involved, or when scaffolding is needed. Fixing the moisture source quickly is the best way to keep costs down.
Does home insurance cover wet rot?
Most home insurance policies exclude rot, including wet rot, as gradual damage or wear and tear. If the rot was caused by a sudden insured event, such as an escape of water from a burst pipe, some resulting damage may be covered. Check your policy and talk to your insurer before work starts.
How long does a wet rot repair take?
A resin repair to a window sill or frame often takes a few hours, spread over a day or two to allow the resin to cure before painting. A door frame splice usually takes a day. Joist repairs take one to a few days depending on access and how many joists are affected.
Written and checked by the Wet Rot Treatment team. Read our editorial policy.
More guides
Rotten Window Sill: Repair with Resin or Replace It?
If the rot is limited to part of a sill or frame and the surrounding timber is sound, a resin repair at £120–£350 per window is usually the best…
How to Check Your Home for Wet Rot: A Room-by-Room Guide
Check for wet rot wherever timber stays wet: window sills and bottom rails, door frame feet and thresholds, fascias and bargeboards, floor joists…
DIY Wet Rot Repair vs Hiring a Professional
Small areas of wet rot in non-structural joinery, such as a soft corner of a window sill or the bottom of a door frame, can be repaired by a…
How to Prevent Wet Rot: A Seasonal Maintenance Calendar
Wet rot is prevented by keeping timber dry. In spring, inspect and repair paintwork and putty. In summer, carry out painting and timber repairs while…
Get a free wet rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote