Wet Rot Treatment

Guide · Homeowners · 3 min read · Updated 17 November 2026

DIY Wet Rot Repair vs Hiring a Professional

Short answer

Small areas of wet rot in non-structural joinery, such as a soft corner of a window sill or the bottom of a door frame, can be repaired by a competent DIYer using wood hardener and two-part epoxy filler. Larger sill replacements, door frame splices, floor joists, fascias at height and roof timbers are best left to a professional, especially where structure or access is involved.

DIY Wet Rot Repair vs Hiring a Professional

First, fix the water

Whoever does the repair, it will only last if the timber stays dry afterwards. Before touching the rot, find out why the wood got wet. On windows and doors the cause is usually failed paint, cracked putty, open joints or a blocked drip groove. On floors it is often a plumbing leak, a damp wall or blocked air bricks. On roof edges it is usually overflowing gutters or failed felt.

Fix the cause first. Then let the timber dry out. A repair carried out on wet timber is likely to fail, because resin and paint do not bond well to damp wood.

What you can do yourself

Small, local repairs to non-structural joinery are reasonable DIY projects for someone comfortable with basic tools. The method is the same as a professional resin repair, just on a smaller scale. Cut and scrape out all soft timber back to sound wood. Apply a liquid wood hardener to the exposed area and let it soak in. Fill with a two-part epoxy wood filler, building it slightly proud. Once cured, sand and shape it to match, then prime and paint.

Take your time. The most common DIY mistake is leaving soft timber in place under the filler, which allows the decay to continue unseen.

  • Small soft patches on window sills and frames
  • The bottom of internal door frames and skirtings
  • Shallow decay on garden gates and fence rails
  • Repainting and replacing failed putty
  • Clearing drip grooves and resealing joints

When to call a professional

Anything structural should be assessed by a professional. Floor joists, wall plates, rafters and lintels carry loads, and getting the repair wrong can affect the safety of the building. Repairs at height, such as fascias, soffits and bargeboards, need safe access equipment. Full sill replacements and door frame splices need joinery skills to make strong, weathertight joints. Large areas of decay may also indicate a hidden problem that needs investigating.

If the decay turns out to be close to a structural element, such as a door frame carrying a lintel, stop and get advice before cutting further.

RepairDIY or professionalProfessional price
Small resin repair to sill or frameDIY possible£120–£350 per window
Window sill replacementProfessional£250–£550
Door frame spliceProfessional£180–£400
Floor joist repairProfessionalfrom £200 per joist
Fascia and soffit replacementProfessional£45–£90 per metre
Roof timber repairProfessional£400–£2,000

Using preservatives safely

Wet rot generally stops once timber dries, so heavy chemical treatment is not usually needed. A brush-applied preservative on nearby sound timber can help protect it, especially where new timber is spliced into old. Follow the product instructions carefully, wear gloves and eye protection and ventilate the area well. Professionals using timber preservatives must follow the Control of Substances Hazardous to Health Regulations 2002, including a risk assessment and following the product's safety data sheet. It makes sense to take the same care at home.

Common DIY mistakes

Many DIY repairs fail within a year or two for avoidable reasons. Filling over soft timber instead of removing it is the biggest. Others include using a decorator's filler that is not designed for exterior timber, painting over the repair without primer, and not fixing the original cause. Sealing joints with silicone instead of repairing them can trap water inside the timber.

Another mistake is underestimating the extent of decay. What looks like a small soft corner can turn out to run along the whole sill once you start cutting. If that happens, stop and consider replacement or professional help.

If you are unsure whether a repair is within your skills, ask a joiner to look at it. Many are happy to tell you whether a job is a small resin fix you could tackle yourself or something that needs replacing.

Choosing a professional

For joinery, look for a joiner or carpenter with experience of repairs rather than just new installations, especially for period windows. For structural timbers, a carpenter or timber specialist who can explain how they will support the structure and isolate new timber from damp masonry is important. Ask for a written quote describing each repair, the timber and treatment used, the finish and whether access equipment is included. Ask to see the decayed timber once opened up.

Before starting any DIY repair, take photos of the decayed area. If the job grows beyond what you expected, those photos help a joiner quote accurately without a second visit.

Tools and materials for a small DIY repair

For a small resin repair you need very little specialist kit. Most of it is available from builders' merchants and DIY stores. Read the instructions on the hardener and filler before you start, because working times and curing times vary between products and with temperature.

Work on a dry day with temperatures mild enough for the resin to cure. Cold weather slows curing considerably.

  • Sharp chisel, scraper and multi-tool for removing decay
  • Liquid wood hardener and a small brush
  • Two-part epoxy wood filler and mixing board
  • Filling knives and abrasive paper
  • Exterior primer, undercoat and topcoat

Questions people also ask

Can I just fill rotten wood?

Only after removing all the soft, decayed timber and hardening the remaining wood. Filling directly over rot traps the decay inside, and the repair will fail as the timber continues to break down. Use a two-part epoxy filler designed for timber, not a general-purpose decorating filler.

Does wood hardener stop rot?

Wood hardener binds weakened fibres and provides a firm base for filler, but it does not cure rot on its own. The decay stops when the timber dries out. That is why fixing the water source and keeping paint in good condition are essential parts of any repair.

Should I treat new timber before fitting?

Yes. Use pre-treated timber for repairs where possible, and apply preservative to any cut ends. Prime all faces, including the back and ends, before fitting. This helps the timber resist moisture and makes the repair last longer. Untreated cut ends soak up water quickly and are a common starting point for new decay.

Written and checked by the Wet Rot Treatment team. Read our editorial policy.

Get a free wet rot treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote