Guide · Homeowners and landlords · 3 min read · Updated 17 November 2026
How to Prevent Wet Rot: A Seasonal Maintenance Calendar
Short answer
Wet rot is prevented by keeping timber dry. In spring, inspect and repair paintwork and putty. In summer, carry out painting and timber repairs while wood is dry. In autumn, clear gutters, check roof edges and keep air bricks open. In winter, check lofts, plumbing and condensation. Regular painting every few years and quick repairs to leaks are the most effective protection.
Why prevention works
Wet rot only attacks timber that stays very wet for long periods. If timber can dry out between rain showers and leaks are fixed promptly, the fungus cannot get started. That makes wet rot one of the most preventable problems in a home. A few hours of maintenance each season costs far less than replacing sills, frames, fascias or joists.
The key is to keep water out of timber, give it a chance to dry and spot early signs before decay sets in.
Wet rot is also a slow problem. It usually takes several seasons of wet timber before decay becomes serious, which gives you plenty of opportunity to catch it if you look regularly.
Spring: inspect and plan
Spring is the time to inspect the house after winter. Walk around the outside and look closely at windows, doors, fascias and bargeboards. Check for cracked or flaking paint, missing putty, open joints and soft spots. Probe suspect areas with a screwdriver. Look at the ground around the house to make sure air bricks are clear and soil is not piled against walls or timber cladding.
Make a list of jobs for summer. Book contractors early if you need help, because joiners and decorators get busy in good weather.
Summer: paint and repair
Summer is the best time for exterior timber repairs and painting. Timber is at its driest, resins and paints cure properly and there is less chance of rain spoiling the work. Carry out resin repairs and sill replacements, then prepare and repaint windows and doors. Make sure paint covers the end grain and joints, and that the drip groove under each sill is clear.
Most exterior paint systems need renewing every few years depending on exposure. South- and west-facing elevations and coastal homes usually need attention more often.
Keep a note of when each elevation was last painted and what system was used. It makes it much easier to plan the next repaint before paint starts to fail.
- Resin-repair or replace soft sills and frame joints
- Replace failed putty and seal open joints properly
- Prepare, prime and repaint exterior joinery
- Clear drip grooves under sills
- Treat cut ends of any new timber
Autumn: gutters and roof edges
Autumn is about getting water away from the house before winter. Clear gutters and downpipes once most leaves have fallen. Overflowing gutters soak fascias, soffits, rafter feet and the tops of walls, and are a leading cause of wet rot at roof level. Check that downpipes discharge into drains rather than onto walls or timber.
Look up at the roof from the ground with binoculars for slipped tiles, lifted flashing or damaged ridge. Check air bricks again and clear any leaves or debris.
Trim back climbing plants and overhanging branches too. Ivy and dense shrubs against walls and fascias trap moisture and slow drying, and roots can block drains.
Winter: inside checks
In winter, attention turns indoors. Check the loft after heavy rain for drips or stains on timbers. Look under sinks and around baths and showers for leaks, and make sure seals are intact. Condensation is at its worst in winter, so keep bathrooms and kitchens ventilated and wipe heavy condensation off window sills, which can otherwise soak into the timber and rot it from the inside.
Keep the home heated steadily and avoid drying clothes on radiators near timber windows without ventilation.
Check that bathroom and kitchen extractor fans are working and actually clearing steam. A fan that runs but moves little air does not prevent condensation.
| Season | Main tasks |
|---|---|
| Spring | Inspect joinery, probe soft spots, clear air bricks, plan repairs |
| Summer | Timber repairs, repainting, putty and drip grooves |
| Autumn | Clear gutters and downpipes, check roof edges and air bricks |
| Winter | Check loft, plumbing and seals, manage condensation |
Advice for landlords and holiday lets
Rented homes and holiday lets often have less day-to-day attention, so a written maintenance plan is especially useful. Build an annual exterior inspection into your routine, ideally in spring, and budget for repainting on a regular cycle. Ask tenants to report leaks, damp or soft timber promptly. Small repairs at £120 to £350 per window are much cheaper than full replacements, and catching a leaking roof early can avoid roof timber repairs of £400 to £2,000.
Signs your maintenance plan is working
After a year or two of regular maintenance you should see fewer flaking patches on exterior paintwork, dry timber around windows after rain and no new soft spots when you probe sills and frames each spring. Gutters should flow freely without staining on the fascias or walls below, and the loft should stay free of fresh water marks.
If problems keep returning in one place, there may be an underlying defect, such as a poorly detailed sill, a leaking valley or a damp wall feeding a joist end. That is the moment to get a carpenter, roofer or surveyor to look at the cause rather than just repainting or patching again.
Questions people also ask
How often should exterior timber be painted?
It depends on exposure and the paint system, but many homes need exterior joinery repainting every few years. South- and west-facing elevations and coastal properties usually need it more often. Check paintwork each spring and touch up cracks before water gets in, rather than waiting for a full repaint.
What is the best time of year to repair rotten wood?
Late spring and summer are best for exterior timber repairs. The wood is drier, resins cure properly and paint can be applied in good conditions. Urgent repairs can be done at other times, but the timber should be dry and protected from rain while the repair cures.
Can condensation cause wet rot in windows?
Yes. Heavy condensation running down the glass every morning can soak into timber sills and the bottom rails of windows, leading to wet rot from the inside. Improve ventilation, use extractor fans and wipe off condensation regularly. Keep inside paintwork in good condition to protect the timber.
Written and checked by the Wet Rot Treatment team. Read our editorial policy.
More guides
How Much Does Wet Rot Treatment Cost in the UK?
Wet rot repairs in the UK cost £120–£350 per window for a resin repair, £250–£550 for a new window sill and £180–£400 for a door frame splice. Floor…
Rotten Window Sill: Repair with Resin or Replace It?
If the rot is limited to part of a sill or frame and the surrounding timber is sound, a resin repair at £120–£350 per window is usually the best…
How to Check Your Home for Wet Rot: A Room-by-Room Guide
Check for wet rot wherever timber stays wet: window sills and bottom rails, door frame feet and thresholds, fascias and bargeboards, floor joists…
DIY Wet Rot Repair vs Hiring a Professional
Small areas of wet rot in non-structural joinery, such as a soft corner of a window sill or the bottom of a door frame, can be repaired by a…
Get a free wet rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote