Guide · Homeowners · 4 min read · Updated 17 November 2026
How to Check Your Home for Wet Rot: A Room-by-Room Guide
Short answer
Check for wet rot wherever timber stays wet: window sills and bottom rails, door frame feet and thresholds, fascias and bargeboards, floor joists near damp walls, roof timbers below leaks, and timber around baths, showers and sinks. Signs include soft or spongy wood, dark staining, cracking along the grain, flaking paint and a musty smell. Probe suspect timber gently with a screwdriver.
What wet rot looks like
Wet rot is decay caused by fungi such as Coniophora puteana, often called cellar fungus, which attack timber that stays very wet for long periods. Decayed timber is typically darker than sound wood, soft and spongy when wet, and may crack along the grain as it dries. You may see thin dark brown or black strands on the surface. Painted timber often shows the problem first through flaking paint, which hides softness underneath.
Unlike dry rot, wet rot stays confined to the wet area. That makes it easier to find once you know where water collects.
Outside the house
Start with a walk around the outside. Most wet rot in homes is found in external joinery and roof edges, where rain and blocked gutters keep timber wet. Look closely at the lowest parts of windows and doors, because that is where water collects. Use binoculars for high-level fascias and bargeboards rather than climbing a ladder.
Note any area where paint is peeling, joints have opened or timber is discoloured. These are the points to probe more closely.
Pay special attention to elevations facing the prevailing wind and rain, usually south and west in much of the UK. Joinery on these sides weathers fastest and is often the first to show decay.
- Window sills, bottom rails and frame joints
- Door frame feet, thresholds and door bottoms
- Fascias, soffits and bargeboards behind gutters
- Timber cladding and garage doors near ground level
- Fence posts, gates and decking in contact with soil
Inside the house
Inside, wet rot is most often found where plumbing leaks or damp walls keep timber wet. In bathrooms, check floorboards around the toilet, bath and shower, the bath panel and the bottom of door frames. In kitchens, look under the sink, behind the dishwasher and washing machine, and at kickboards. Under-stairs cupboards and pantries against external walls are also common spots.
If you have suspended timber floors, check for springy or uneven boards near external walls. If you can lift a board, look at the joist ends where they sit in or on the wall, and at the wall plate beneath them. Blocked air bricks are a common cause of decay under floors.
In the loft
Go into the loft on a dry day with a good torch. Look at the underside of the roof for stains, especially around chimneys, valleys and where the roof meets walls. Check rafter feet and wall plates at the eaves, which can rot if gutters overflow or felt has failed. Water staining on timbers below a leak is common. Soft timber at the same spot means wet rot has started.
Watch where you step and only walk on joists or boarded areas.
While you are up there, check that loft insulation has not been pushed into the eaves, blocking ventilation. Poorly ventilated roof spaces can suffer from condensation that soaks into rafters and sarking boards over time.
Signs and what they mean
Some signs point clearly to wet rot. Others may suggest different problems, such as condensation or woodworm. The table helps you interpret what you find.
Remember that timber can feel soft when wet but harden as it dries, so a dry spell can hide decay. Probing is more reliable than touch alone.
| What you see | Likely meaning | Next step |
|---|---|---|
| Soft, spongy timber that is wet | Active wet rot | Find and fix the water source |
| Dark, cracked timber along the grain | Wet rot, possibly drying | Probe depth, plan repair |
| Flaking paint on sills and frames | Water getting into joinery | Probe for softness, repaint |
| Springy floorboards near walls | Possible joist or board decay | Lift a board and inspect |
| Stained rafters around a chimney | Roof leak | Repair the leak, check timber |
| Small round holes and fine dust | Woodworm rather than rot | Specialist inspection |
What to do with your findings
Make a list of each area of concern with photos. For each, identify where the water is coming from: failed paint, a leaking gutter, a plumbing leak or a damp wall. Fix the source as soon as you can, since that stops the rot from progressing. Small areas of softness in joinery can then be repaired with resin or new timber. For floor joists, roof timbers or anything structural, ask a carpenter or timber specialist to assess before repairing.
If you find decay in several places, look for a common cause. Rotten joinery on one elevation only often points to weather exposure and paint failure on that side, while widespread floor decay suggests a ventilation or ground-level problem.
Outbuildings, decking and garden timber
Garden structures are easy to forget but often show wet rot first, because they have less protection than the house. Check the bottom of shed walls, the floor bearers under sheds and summerhouses, gate posts, fence posts at ground level and decking joists where they sit on or near soil. Decking boards that flex underfoot or have dark, soft ends are a common warning sign.
Timber in direct contact with soil is at the highest risk. Where possible, keep it raised on concrete or gravel, use timber treated for ground contact and leave gaps so air can circulate. Replacing a rotten fence post or decking joist early prevents the rest of the structure from sagging or collapsing.
Shed and summerhouse roofs are worth a look too. Torn felt lets water soak into the roof boards, which then rot and sag.
Questions people also ask
How do I test wood for rot?
Push a screwdriver or bradawl gently into the timber at an angle. Sound wood resists and the tip only goes in a millimetre or two. Rotten wood gives way easily, feels spongy or breaks up. Test several points, especially at joints and the lowest parts of frames, and compare with nearby sound timber.
Can wet rot be hidden behind paint?
Yes. Paint can look intact while the timber underneath has gone soft, especially on sills, frames and door bottoms. Hairline cracks in paint let water in but slow its escape, which keeps the wood wet. Probing is the only reliable way to check what is under the paint.
How often should I check for wet rot?
A quick check once a year is sensible, ideally in autumn before winter weather sets in. Look at windows, doors and roof edges outside, and bathrooms, kitchens and the loft inside. Check again after any leak, storm or long spell of heavy rain.
Written and checked by the Wet Rot Treatment team. Read our editorial policy.
More guides
How Much Does Wet Rot Treatment Cost in the UK?
Wet rot repairs in the UK cost £120–£350 per window for a resin repair, £250–£550 for a new window sill and £180–£400 for a door frame splice. Floor…
Rotten Window Sill: Repair with Resin or Replace It?
If the rot is limited to part of a sill or frame and the surrounding timber is sound, a resin repair at £120–£350 per window is usually the best…
DIY Wet Rot Repair vs Hiring a Professional
Small areas of wet rot in non-structural joinery, such as a soft corner of a window sill or the bottom of a door frame, can be repaired by a…
How to Prevent Wet Rot: A Seasonal Maintenance Calendar
Wet rot is prevented by keeping timber dry. In spring, inspect and repair paintwork and putty. In summer, carry out painting and timber repairs while…
Get a free wet rot treatment quote
Tell us what you need and we'll come back with a clear price.
Request a quote