Wet Rot Treatment

Wet Rot Treatment

Door Frame and Threshold Repairs

Rotten door frame feet, thresholds and the bottom of external doors repaired or replaced so doors close properly and stay weathertight.

Free Wet Rot Treatment quote

No obligation. We only use your details to reply about this job.

Door Frame and Threshold Repairs — Wet Rot Treatment

What's involved

The feet of external door frames sit closest to splashback and standing water, so they are a classic wet rot spot. Thresholds and the bottom rails of timber doors are also vulnerable, especially where a weatherboard is missing. The joiner cuts out the rotten section of frame, usually 150 to 300 millimetres up from the step, and splices in a new piece of pre-treated or hardwood timber, joined with a scarf joint, glue and screws. Thresholds are replaced in hardwood with a proper drip and seal. Doors can be repaired with a new bottom rail or resin, and a weatherboard added to throw water clear. Expect half a day per door. Raise any issues with ground levels or drainage at the step, as these often cause the rot.

How we handle it

  1. Describe the decay

    Use the quote form to say which timbers are soft or rotten, where they are and how long the problem has been noticed, with photos if possible.

  2. Inspection

    A joiner or timber specialist probes timbers, takes moisture readings, confirms wet rot rather than dry rot and finds the moisture source.

  3. Clear fixed price

    You receive one price covering the repair or replacement, treatment and the fix for the moisture source where it is part of the job.

  4. Repair work

    Decayed timber is cut out, sound timber treated and new wood or resin fitted. Leaks, drainage or ventilation are put right.

  5. Finish and protect

    Repairs are primed, painted or sealed. You receive details of the work and advice on maintenance to prevent future rot.

Price guide

Wet rot treatment is priced on the timber involved, how much is decayed and whether repair or replacement is best. Resin repairs to windows cost less than new sills, and replacing a few floorboards costs less than joist work. Access, such as scaffolding for fascias, adds to costs. The 2026 guide figures below cover common repairs.

  • Window sill replacement: £250–£550. New pre-treated or hardwood sill fitted with the frame left in place, plus painting.
  • Window sill or frame resin repair: £120–£350 per window. Cutting out decay, hardening, filling with epoxy resin and painting, depending on the extent.
  • Roof timber repair: £400–£2,000. Rafter ends, wall plates or decking repaired alongside roofing work, depending on scale.

Questions about door frame and threshold repairs

How do I identify wet rot?

Signs of wet rot include timber that feels soft or spongy, darkened wood, cracking along the grain, flaking paint and a musty smell. Pressing a screwdriver into the wood will sink in easily. It usually appears where timber is wet, such as sills, door frames, fascias and joists near leaks.

Is wet rot worse than dry rot?

Wet rot is usually less serious than dry rot. It stays confined to wet timber and stops once the wood dries, so repairs are more localised. Dry rot can spread through masonry and often needs more extensive treatment. However, wet rot in structural timbers can still cause significant damage.

Is wet rot covered by insurance?

Wet rot is usually not covered by home insurance because it develops gradually from damp or poor maintenance. If it results from a sudden insured event, such as an escape of water, part of the damage may be covered. Check your policy and contact your insurer promptly.

Get a free wet rot treatment quote

Tell us what you need and we'll come back with a clear price.

Request a quote